General Aviation Safety and the Cirrus SR22

Prior to the start of my flight training, I was clueless about general aviation safety. When I began researching the SR22, I was extremely surprised that in the short lifespan of the Cirrus planes, they have already been involved in 26 fatal accidents (with 52 deaths). That number still runs chills through my body. To put things in perspective, there are only about 3,400 Cirrus planes ever made. With 26 fatal accidents, that means 1 in approximately every 130 Cirrus planes have crashed killing at least 1 person on board. That’s a sobering statistic. 1 in 130.

Up until this point, I had operated under the assumption that “flying is safer than driving.” This is true when comparing Commercial Airliners against the general driving population, but it’s far from it when comparing General Aviation to car accidents. That was all news to me. I decided I needed to do a lot more research on General Aviation Safety and Cirrus planes before becoming an owner.

Pilot Safety Discussions

If you listen to or read any forum messages where pilots discuss fatal aviation accidents, inevitably someone will blame an incompetent and inexperienced new pilot for making fatal mistakes and they move on. With the Cirrus owners in particular, lots of people blame the “new, young, rich entrepreneur” who gets a plane for all the wrong reasons. They claim that the Cirrus airplanes have become the new “must-have toy” for these rich people who have no business flying and they end up killing themselves and their passengers. Some people even blame Cirrus marketing for going after new pilots.

Unfortunately, such pilot discussions are rarely supported by any studies, statistics or proof to support the case against new pilots. These type of posts appear to be a way to convince the writer him or herself that fatal crashes happen to “other people” who are not competent. Since much of the pilot discussions blamed pilots with my exact background, my research into this matter became even more intense. I was afraid that if the overall statistics are “bad”, then for me (new, rich entrepreneur) flying a high-performance plane such as the Cirrus might be much worse.

Reading the Accident Reports

I decided to dig up some accident reports to see for myself. The first place to get some factual information is the National Transportation Safety Board (NTSB). The NTSB investigates every aviation accident and makes the reports publicly available and searchable on their web site. That’s very cool. Anybody can read the accident reports for themselves. Here’s how to find every Cirrus accident report the NTSB has in its database:

1. Go to this page: http://www.ntsb.gov/ntsb/query.asp
2. For the “Make/Model” field, type “cirrus”
3. If you prefer to just see the fatal accident reports, you can choose “fatal” under the “Injury/Severity” field
4. Click Submit Query and your search results will show

Reading the Cirrus accident reports, it becomes obvious that the problem is not just with new inexperienced pilots. There have been fatal accidents with nearly all kinds of pilots with the largest group of fatal accidents (16 of the 26) having greater than 400 total hours of flight experience. So Cirrus Marketing to new pilots and the new group of rich entrepreneurs who need to have the latest toys are not to blame.

Unfortunately, that still was not very comforting.

Statistics Don’t Lie

The next question I had was about how the Cirrus planes compare to the General Aviation average accident rates. Once again, the NTSB provides excellent statistics about General Aviation accidents. Here’s a summary of the number of fatal accidents per 100,000 hours of flight for the past 20 years:

The graph shows that in recent years fata accidents happen at a rate of 1.3 for every 100,000 hours of flight. The NTSB also puts out an Annual Review of Aircraft Accident Data. The latest copy of this report is for calendar year 2003 (where are the newer ones!?!). This is a very well-prepared document with more statistics than you ever cared to know about General Aviation. It’s an excellent source of information and I highly recommend that every pilot, new or veteran, at least review this information:

NTSB’s Annual Review of Aircraft Accident Data for 2003

I’ve gone ahead and summerized some of the highlights of the report here.

1 in 2,000 Pilots Die Every Year

One of the first graphs you’ll find in the NTSB Annual Review of Aircraft Accident Data is this one:

There’s no good story to tell here. According to this graph, approximately 1 in every 2,000 pilots die every year due to a fatal aviation accident. If you plan to be a pilot for 40 years of your life, the chances during your lifetime (assuming the stats don’t improve) is about 1 in 50! Ouch. That hurts.

It might be comforting to know that according to the National Safety Council’s general population Odds of Dying by any accident during the average lifetime, is about 1 in 22. As a pilot, you’re barely nudging your overall chances in the wrong direction. So don’t worry, you’re in good company. Even if you weren’t a pilot, your overall chances of dying from an accident is 1 in 22.

Fatal Accidents by Type of Operation

Unfortunately, it doesn’t get much better for us casual personal & business pilots. Since the overall GA accident statistics also includes corporate jets, which have a signficantly lower accident rate, breaking it down by type of operation brings the casual pilot accident rate closer to 2 fatal accidents per 100,000 hours of flight:

Notice how low the grey bars are. It appears that Corporate/Executive fatal accidents are closer to .1-.2 per 100,000 flight hours making corporate/executive traveling significantly safer than cars. So if you can afford it and you don’t enjoy the flying aspect of being a pilot, hiring a professional pilot for your corporate plane might be a better way to go.

Accidents by Type of Aircraft

One additional set of statistics worth examining is the rate of accidents based on the type of aircraft:

As you can see from the chart above, Amateur-Built experimental planes have the worst safety record, with nearly 4 times as many fatal accidents as a single-engine piston airplane.

Back to Cirrus Planes

With all the General Aviation safety statistics in hand, you’re probably still wondering as I was how the Cirrus stacks up to the GA average accident rates. Fortunately, or unforutnately, depending on how you look at it, the Cirrus planes don’t stand out in either direction. With about 1.44 fatal accidents per 100,000 flight hours during their lifetime, the Cirrus planes are slightly higher (but statistically insignificant) than the average Single-Engine piston, which stands at 1.41. The big problem is that you’d expect that Cirrus planes would definitely stand out and have a signifcantly lower fatal accident rate. After all, the Cirrus planes have a lot going for them:

• Significantly newer fleet compared to average age of GA planes
• CAPS Safety System (parachute)
• Modern Design for Safety and Control
• State of the Art Avionics

Yet, with all the advantages that Cirrus planes should have, the fatal accident rates so far have not been better than average. There is a lot more Cirrus-specific accident information and statistics on COPA. There’s also an excellent presentation that was given by Rick Beach which is available on COPAPedia. COPAPedia is a Wiki for COPA members with information about everything from maintenance to safety to operations and even accessories. If you aren’t a COPA member and you’re considering a Cirrus plane, it’s a great place to do extensive research and meet other Cirrus pilots.

In Rick’s presentation, he also points out that the CAPS system was activated 13 times with 10 saves (saving 22 lives) and 3 CAPS activations being counted as failures (2 fatalities). However, the overwhelming evidence points to the CAPS system working well in emergency scenarios where the pilot loses control of the aircraft. So when in doubt, pull the chute, ask questions later when you live.

Conclusion

It was disapointing to find that Cirrus planes don’t appear to be any safer than the general single-engine fleet of planes. That brings the safety responsibility back to the pilot. The bad news here is that a lot of pilots don’t think it can happen to them and they blame fatal accidents on stupid pilots. The problem is that we’re all stupid pilots every now and then. The key is to not be in denial. General Aviation is not as safe as driving. Period. It’s about 7 times more fatal (about the same risk as motorcycles). But the risks are significantly less when flying in good weather during the day, in VFR conditions and in familiar territory. Night accidents are almost twice as likely to result in fatalities and forget about it if the weather is bad. Overconfidence contributes to the bad statistics. The plane is a small part of the accident story, which is why the Cirrus planes have not been able to save the pilots who make bad decisions. That’s too bad. I think more can be done.

The thing to remember is that it can happen to you. Make good decisions and when in doubt, pull the chute!

More Research

If you’re looking for additional information on aviation safety, here are some great sources:

• NTSB’s Annual Review of Aircraft Accident Data for 2003
• AOPA’s Air Saftety Foundation Special Reports (Includes a Report on Glass Cockpit planes)
• Cirrus Owners and Pilots Association (COPA)
• COPAPedia (the Wiki maintained by COPA members)

Tax Benefits of a Business Airplane

It’s nearly impossible to get quick answers when it comes to aviation tax questions.  Everybody seems to be afraid of providing “generic” tax information since it might not apply in all cases.  So I’ll try to share what I’ve found.  Keep in mind, I’m not a tax expert, so use this information with a grain of salt (and consult an aviation tax expert):

• If you plan to use your airplane mostly for business (> 50%), you can buy it in a wholly owned subsidiary for your business to maximize tax benefits.  This new business would essentially be in the business of “renting” its only aircraft to you or your business.
• Once you have the airplane under the business, each hour the plane is used must be “rented” from your new entity.  Generally, the rental is either by your business (for business use) or by you (for personal use).  Your aviation tax expert can prepare the rental agreements and rates for you.  In this arrangement, your new business would have a small amount of revenue.
• While airplanes are frequently financed on 20-year terms, they can be depreciated on a 5-year schedule and each depreciation dollar would essentially be an expense of this new entity.
• Additionally, the finance charges of the loan as well as maintenance costs of the plane are all expenses to the business entity. 
• The expected outcome is that the new entity would have a substantial operating loss (mostly due to depreciation in the first 5 years).  Since these losses would negatively impact your income, you wouldn’t pay income taxes on the depreciation of the aircraft and other expenses (although you do pay taxes on the rental revenue, which is substantially less).   Depending on your tax bracket and income, you could save X% of the purchase price of the airplane in a 5-year period, where X = [Your Top Tax Rate].  In some cases, this could be as high as 40%!  That’s pretty incredible savings.  In fact, if you finance your plane on a 20-year loan, and you are in the 40% tax bracket, it’s possible to be upside down in the first 5 years (meaning you save enough money on taxes to make all the payments and then some).  After 5 years though, you’re on your own, so plan ahead for the following 15 years too.  Nobody said this was going to be cheap!  Also, keep in mind that if you don’t make more money than the depreciation expense of your plane, your tax benefit will be limited.
• Section 179 depreciation guides for small businesses with less than $500,000 in assets also allow for even faster depreciation of the plane.  Up to an additional $125,000 of depreciation, although this is combined with any other assets the company has.  Also, this depreciation expense starts to go away after a business has $500,000 in combined assets, making the purchase price of an airplane relatively important if you want to take advantage of this additional benefit.
• There are State-Specific Aviation tax guidelines that can greatly impact your purchase.  I don’t know any of them, so do your own research.

There is a significant tax benefit of owning a plane for business.  The savings are driving more and more businesses to own aircrafts.  It was the final straw to convince me to go ahead and make the plunge for my business.

One additional tax issue to consider is the timing of your purchase.  If you purchase an aircraft prior to September 30th of a given year, the depreciation schedule is more favorable than if you make your purchase after September 30th.  It’s something along the lines of 20% instead of 5%.  Although that’s partially offset by the depreciation in subsequent years for those who purchase after September 30th, so keep the September 30th time in mind when making a purchase.

A great source of information and a potential tax advisor is a company called Aviation Tax Consultants.

Cirrus SR22 Doors – Are you Kidding me with This?

During my research of the SR22, one of the recurring complaints I had read about is that the doors are hard to close.  In fact, if you do any level of research, you’ll find that the SR22 door latches have been a common complaint since the first generation of the SR22.  With the SR22 Generation 3 having just been released in May of ‘07, I was confident that I wouldn’t have to worry about this 6-year old problem.  After all, the G3 contains “over 700 improvements” and one of the 700 improvements is about the door!

To my surprise, doors are still a problem in the G3.  A very serious problem!  From the first day I started my training, the passenger door latches gave us problems, often requiring 3 or 4 attempts for them to latch properly.  I know many SR22 owners who are reading this will dismiss this complaint as “lack of experience with the SR22 doors,” but keep in mind, during my training, a Cirrus Certified instructor was sitting in the passenger seat and he has over 400 hours of instruction in the Cirrus, probably in 30 different SR22s!  Plus, how much experience should be required to simply close a door?  My own door was not nearly as problematic, usually closing on the first try, but still requiring a second attempt to close every 4th or 5th time I flew.  Even that is unacceptable if you ask me (I know, I know – nobody asked me).

One of the biggest problems with the doors is that there is no easy way to tell if the door is properly shut until the engine is revving > 1500 RPM.  At that point, you hear an obvious whistling sound from the wind generated by the propeller.  This sound is the alarm bell that the door was not shut properly.  Unfortunately, often times at 1500 RPM, you hear this sound during takeoff while you’re on the runway.  It happened to us three times during training.  We had to abort the takeoff, shut the door then continue.  For readers who are thinking you should have caught the door issue during runup, I have this to add: a) during training, runup was usually done once in a 3 or 4 hour session, but we’d often open the door after landing for some fresh air and b) we caught the door issue nearly a half dozen times during runup.

It gets worse.  Even when the door is shut and appears to be latched properly, the door can still unlatch during flight.  That too happened to us twice during training!  Both times with the passenger door and the transition trainer seated in the passenger seat.  The first time it happened during climb.  We were 10 minutes into a 2-hour trip when all of a sudden there was a loud bang and you could hear the gushing air coming in.  We had to to immediately slow down (the Emergency procedures call for a speed under 90 knots), then scramble to find a nearby airport to land.  The diversion easily cost us 30 minutes and almost a heart attack for a rear-seat passenger.  The second time, it happened on descend, in the last 10 miles of another two hour trip.  It doesn’t make much sense for the door to unlatch during descend since the outside pressure becomes higher than inside pressure, so if anything, it should shut the doors more tightly.  But there we were, 10 miles from our destination, flying smoothly for nearly two hours when both the trainer and I jumped out of our seats from the loud sound.

So what’s the deal?  With more than 3,000 aircraft built and being on the 3rd generation of the SR22 with over 700 improvements, why does this problem still persist?  It’s a lawsuit waiting to happen.  How hard could it be to get the doors right?  I’ve never heard of a car door that doesn’t shut right (unless it’s been in an accident).  Even Columbia seems to have figured out how to close a door properly on the first try and they’ve built fewer than 600 planes and are still in their “first generation.”  With the average new SR22 costing nearly a half million dollars, you’d think there’s enough money in there to build doors that shut on the first try.

I should add that even with all the door problems,  I never felt in any kind of danger.  The doors never sprung completely open.  Mostly, the bottom latch would come undone, which caused a half-inch gap to open at the bottom of the door.  But when it did happen, it was extremely annoying and it could be very traumatizing to any passengers.  I’ve decided to modify my passenger briefing to include the following additional statement: if the doors unlatch during flight, don’t panic, that’s part of an advanced new system design by Cirrus Research to demonstrate the plane’s ability to function with open doors.  It’s part of the CRAPS system (as in “craps!  my door just popped open”).

Picking up My SR22 at the Cirrus Factory in Duluth, MN

The purchase process of my SR22 was painless.  Financing was done in one day, insurance took another day and getting all the paperwork done was another couple of days.  In all, after 4 days, I had a plane in my name.  The only problem?  It was sitting in Duluth, MN at the Cirrus factory.  So it was time to make a trip and pickup my new plane.  This was the most exciting trip I had planned for a long time.  The nicest part was that it was a one-way airline purchase.

First Impressions of Cirrus Design Corporation

When I arrived at the Cirrus Design headquarters, I was greeted by Lori the receptionist, and Judy a customer service coordinator.  They welcomed me and provided me with a pre-printed badge with my name and the tail number of my plane.  I was really impressed by how nice and prepared they were.  In fact, during my entire stay in Duluth, I was quite impressed by every Cirrus employee that I met.  One after another, they were eager to listen and even more eager to solve any problems.  In the Cirrus customer reception lounge, I met with two Cirrus executives who were waiting to talk to owners who were receiving their planes that day.  They chatted, told stories, asked questions and offered their business cards in case an owner wanted to follow-up.  I felt adequately pampered, but in a sincere way.  Lunch and drinks were provided during my stay compliments of Cirrus.  Cirrus definitely has their sales process and customer reception down.

The Cirrus Factory Tour

One of the first things on my agenda was to get a Cirrus factory tour.  I wanted to see how these planes were made.  Our tour guide was extremely knowledgeable and again, super nice.  She took us through the entire facility, showing everything from the preparation of the composite materials to the creation of the wing, the fuselage, the assemby of the parts, gluing and fusing the various components together and even to the installation and debugging of the avionics.  It was really amazing to see how they build these planes.  One of the statistics that sticks out in my mind is that from the raw parts delivery to a completed airplane takes Cirrus 18 days.  Just 18 days to make an airplane.  That’s pretty cool.

Unfortunately, photography of the manufacturing areas was not allowed.  So I was only able to sneak a picture of the final preparations room from the customer lounge window and the Cirrus SRS mockup (a light sports aircraft they are working on):

The Final Preparation Stage

The Cirrus SRS Sport Mockup

Cirrus Transition Training

After receiving my plane, my Cirrus Transition Training was scheduled to begin.  With exactly 0 hours of PIC time in an SR22 I met with my assigned instructor to get started.  I should mention that prior to my trip to Duluth, Cirrus had sent me a training packet which included a generic POH and documentation on all the avionics.  Additionally, Cirrus has partnered with Jeppeson for a flash-based online training class that you are encouraged to finish prior to your arrival.  I highly recommend it.  Although the Jeppeson flash-based training web site is clugy to navigate, a pain in the ass to use and about twice as long and slow than it needs to be, the videos are helpful and the materials do help you become familiar.  But guys, if you’re listening, you need to clean it up and make it available offline.

My instructor started us out with a slidedeck of powerpoint slides that I thought would never end.  For about an hour we covered what we were going to cover in the next 3 days.  Very helpful.  Not!  Then finally, we went into the SR22 cockpit and cabin simulator.  This part was super helpful.  This was the first time I was actually using the avionics, learning the buttons, the function of each knob and navigating through the screens.  There’s a lot to learn and I have to say, most of it is not very intuitive.  Especially the Garmin 430s.  Lets just say they’re not going to win any design awards.  Seriously guys, does the FAA prohibit good UI design in avionics certifications?

The Simulator also has the CAPS handle and part of the training is to go ahead and pull the CAPS handle in the simulator several times so you can see how its supposed to feel in case of an emergency.  It might not seem like a big deal, but I feel much better knowing that I have pulled that handle several times and I know how its suppose to feel in my hand when its pulled.  That level of confidence alone was worth the entire price of the simulator.  The simulator time was definitely well spent.

We then had lunch and finally headed out to the plane for our first day of flying.  Wow, this plane is even smoother than I remember it from the demo flight.  On-board checklists make sure you don’t forget anything.  Takeoff couldn’t be easier and the visibility as the plane lifts from the ground is amazing when compared to a Cessna 172.  Maneuvering is extremely responsive in a very good, controllable way.  It was a great feeling to be the PIC of this aircraft.

To make things easier, my instructor was doing all the radio communication.  That was a lot of help.  There’s a lot to learn and having someone else worry about communication allows students to stay focused on the new material.  As we gained altitude I was also starting to enjoy the view.  Minnesota has a lot of lakes.  No, no, let me say that again.  Minnesota has an INSANE number of lakes.  Most are the size of a small pond, but they’re often surrounded by 20 more ponds.  If you were to throw a stone you’d have an equal chance of hitting water or land.  I have never seen anything like it.  The scenery was beautiful.

After about 30 minutes or so of flying, it was time for the first landing.  I had to be reminded several times to slow down to the appropriate speed for the different legs of the pattern.  Apparently, that’s pretty normal for first-timers in a high performance airplane.  As we made the final approach, my very first landing was probably the smoothest landing I had ever had in any aircraft up to that point.  This plane is incredibly easy to land.  When compared to a Cessna, which has extremely poor visibility, in the SR22 you can see the runway in front of you allowing you to maneuver much easier.  It felt very natural to me.  Over the next 5 hours of flying, we practiced Touch-and-Gos at a bunch of different airports, Steep Turns, Stalls and various emergency procedures.  It was all uneventful.

On the second day of training, Duluth weather was no longer VFR, so we decided to fly back to my home town.  My instructor filed an IFR flight plan and we were on our way.  The ride home was smooth and allowed me to become familiar with more of the avionics and auto-pilot.  When we got to my home-town, we simply continued the training, hopping from one airport to another.

The Cirrus Transition Training was awesome.  Don’t buy a Cirrus without it.  You can purchase it even if you buy a used plane and the entire 3-day course costs around $2,000.  I highly recommend it.

My first few days with the plane were not without problems, but I’ll leave that for another post.

How Much for Insurance?

Having narrowed my decision to a Cirrus SR22 non-turbo, next up was to price insurance.  I called up Cirrus Insurance, and when I heard the estimated rates for my insurance (I’m a new pilot and had 0-time in the Cirrus), I thought the person giving me the rates was insane. So what was the range?  $12,000-$18,000 per year.  She couldn’t tell me where on that range I’d fall until I provided full details and asked for a formal quote.

Checking with other insurance agents, rates were very similar and some insurance companies will not offer insurance for pilots with fewer than 500 hours.  So I had to feel lucky that I could even get insurance in the first place.  The rates for aviation insurance are insane.  If you do the math, it must be a very lucrative business:

• The range based on experience and certifications is between $6,000 (for an IFR certified pilot with > 1,000 hrs and 100+ hrs time in Cirrus) to $18,000. 
• There’s generally a $5,000 deductible making the insurance really only for severe incidents
• If an insurance company could insure 1,000 Cirrus planes at an average of $10K each, that’s $10 million per year in revenue.  It’s unimaginable that 1000 cirrus planes would have more than $1-2 million in claims in any given year or about 10-20% of the premiums.  Even on the high range of that claim estimate, and assuming a 10% commission for the agent, I expect that the insurance companies are netting at least 70%.  Not a bad margin at all!  How does one get into this business?

I ended up with insurance through Cirrus’ agent from London Aviation.  With 70 hrs and a private pilot certificate, my rate came in at over $13K per year (about $1100/month).

Choices, Choices: SR22 Turbo or “Normally Aspirated”?

Being that Speed was one of my primary criteria for picking a plane, choosing the SR22 Turbo seemed like a no brainer.  Plus there is a lot of buzz around the SR22 Turbo and the idea of owning the “Turbo” of anything seems pretty appealing to me.  I had also read from COPA members that Cirrus is selling more Turbos than non-turbo (about a 70/30 split).  But I had a lot to learn about what Turbo means to an airplane engine.  My first clue that something is different about turbo airplanes was that both the Turbo and normal versions of the SR22 have the same 310 horsepower.  Huh?  In cars, a turbo engine almost always has another 50 or more horsepower, so what’s the deal here?  How could they have the same horsepower?

Then, I found this:

This graph shows the performance of the SR22 Turbo vs. the Non-Turbo.  Seeing this graph totally blew me away because as you can see, the SR22 non-turbo actually OUTPERFORMS the SR22 Turbo below 10,000 ft Pressure Altitude.  That was a major eye opener for me.  I figured this data had to be wrong, but when I checked with the Cirrus sales rep, he did confirm the graph is accurate.  Below 10,000 ft pressure altitude, you can expect to get the same or better performance out of the non-turbo SR22.  Most SR22 owners don’t know that!  Even fewer Turbo owners know about the performance difference.

I don’t know the details of how it works (maybe a reader can fill us in with a comment), but essentially, in airplanes, a Turbo engine can perform like it’s at sea level altitude, all the way up to its ceiling altitude.  In the SR22 case, that’s 25,000 ft.  So a Turbo SR22 could climb between 15,000 and 20,000 ft the same way it would climb from 0 to 5,000 (that’s the idea anyway).  However, the extra weight and modifications to the engine to allow for the Turbo cause the sea-level performance of the Turbo to be significantly less than the non-Turbo.  It makes up for this shortcoming as the airplane gains altitude.  That’s way different than the performance improvement you can expect from a Turbo on a car.  Could you imagine if a BMW M3 only performed well when you were on top of Mount Everest?

So contrary to popular belief, there are significant disadvantages to the SR22 Turbo, including:

• Worse performance below 10,000 ft Pressure Altitude
• Higher maintenance costs and more things that could go wrong
• Higher up-front cost (of approximately $60,000)
• The Turbo engine costs an extra 50 lbs which is deducted from the useful payload

Plus, for the real benefits of the Turbo, you need to be at oxygen-required altitudes.  Although the SR22 Turbo GTS comes with built-in oxygen, I just don’t see myself or passengers ever wanting to use Oxygen for most of my travels.  I suspect that most of the time, I’ll be right at that 10,000 ft level, so my performance benefits would have been near zero.  My decision would have been totally different if either a) there was a pressurized cabin option or b) I expected to do most of my flying alone.  But knowing that I want to use the plane largely for business travel and with other people, Oxygen would put a damper on the whole experience.

And that’s how I selected the SR22 GTS, Normally Aspirated engine.

Narrowing Down the Choices: Columbia vs. Cirrus

During my research in which plane to purchase, I quickly narrowed it down to a decision between the Columbia and the Cirrus.  Here’s a list of my initial criteria to help me narrow down the manufacturers:

• Single-Engine Piston - With my experience level (new pilot), I knew I wanted a single-engine piston airplane.  Well, I actually wanted a dual-engine Jet, an Eclipse 500 would’ve done, but they tell me I can’t go to that from a Cessna 172.  So the choices were narrowed down to well-established manufacturers: Beechcraft, Cessna, Cirrus, Columbia, Diamond, Mooney and Piper.
• New Technology - I wanted a plane that used composite materials for construction due to their strength, lighter weight and lets not forget, looks!  Composites are the future and it just didn’t make sense to purchase an aluminum-based plane with rivets and ugliness all over.  Not to mention the aluminum options didn’t provide any significant advantage, other than having a time-tested design, which I considered a disadvantage.  The looks of planes from Cessna, Mooney, Piper and Beechcraft haven’t changed for nearly 30 years!  This criteria narrowed my choices to Cirrus, Columbia and Diamond aircrafts.
• Speed - I wanted an airplane that can go fast.  That’s why I’m buying an airplane in the first place: to go fast!  I want to get to destinations faster than if I were to drive there.  This criteria knocked Diamond out of the race.  Although Diamond appears to make great looking composite planes (which are extremely fuel efficient), the performance is just not there.  I don’t want to figure out that I saved an hour on a 4-hour car trip due to head wind.  The Diamond’s DA-50 (not yet in production) would have probably stayed in contention, but the Diamond folks told me it’s a minimum of 2 years away.

So with the choices narrowed to the Columbia and the Cirrus fairly early on, my research began.  Unfortunately, there are no unbiased sources of information on which plane is the better plane.  I tried discussion forums and talking to various owners and all the Google searches I could think of.  The closest thing to an unbiased article I could find is this article by Scott Dennstaedt who is now a Columbia instructor (formerly a Cirrus instructor).  From everything I can tell (including to this day, now that I have my Cirrus SR22), Scott’s article is very fair and thorough.  After reading his article, I became convinced that Columbia makes the better airplane and figured I had my choice narrowed down to the Columbia 350 or the 400.

Demo Flight with Cirrus

Then I scheduled the demos.  My demo with Cirrus was flawless.  I was given the opportunity to fly the SR22 G3 Turbo for a little more than an hour.  The sales rep was extremely pleasant, answered all my questions and had a packet of information that covered everything from insurance (which is ridiculously expensive) to financing (which is ridiculously awesome – 20 years and 6.65%!) to options and pricing.  He was also adamant that the SR22 Turbo was the way to go (more on that in a later article).   Flying the Cirrus had me in love.  It was just so easy to fly.  My only experience prior to the SR22 was around 60 hours in Cessna 152 and 172s, so flying the SR22 felt so responsive and natural.  It was how a plane should be!

Columbia’s Sales Disaster

Next up was a demo flight with the Columbia 400.  From my first contact with the Columbia sales rep, it was a disaster.  My emails went unanswered for days and when I would get a hold of the sales rep, he always had a lame excuse about how his Outlook was not working.  Eventually, we scheduled the demo, which he missed due to a “family emergency” and we rescheduled, which he missed again, due to a “bad mag.”  He informed me of his family emergency 3 days after our scheduled demo time.  Yeh, he stood me up, but hey, I thought it was a family emergency, so I gave him another chance.   About the bad-mag he had the courtesy to let me know 30 minutes after the demo time.  Plus both times, he informed me via email.  It just wasn’t meant to be.  To this day, I’ve never flown in a Columbia.  After the second time that he stood me up, I told him to forget about it.

My bad encounter with the Columbia sales rep wasn’t enough to push me towards the Cirrus.  I knew I wasn’t going to buy from that particular sales rep, but I wasn’t going to choose the wrong plane just because of a bad sales rep.  There were other reasons.  During my research, Columbia happened to have a major issue with their Garmin 1000 systems (although not their fault).  Production of the Columbia aircraft was completely shut down and many of their employees were temporarily laid off.  That didn’t look good.  Further research into Columbia made it apparent that the company’s future prospects were at best, questionable.  In fact, Columbia filed for bankruptcy protection less than a week after I bought my Cirrus.

There was one other reason I chose Cirrus: the Cirrus owners seem to be fanatical about their planes!  If you don’t believe me, take a look at COPA, the Cirrus Owners and Pilots Association.  The group has 2600+ members (there’s only 3400 or so SR22s ever made) and the members are extremely active.  Having a group as active, friendly and helpful as COPA definitely helped narrow down the choice.  Just don’t ask them what they think of the Columbia.

Decision Time

When comparing the performance, payload and range, the Columbia had a slight advantage in all three categories, but the advantages are very small and the SR22 has the Columbia beat in a few other small areas, plus the SR22 has the CAPS system (the chute).  But more than anything, it was the company that convinced me.  Cirrus sells 500+ airplanes per year compared to 100+ for Columbia.  A 5:1 ratio.  They have more service centers, including one at my home airport.  The company seems to be far more solid, profitable and responsive.  Their sales rep showed up!  The Cirrus owners are fanatics and they have a great organization, COPA.

That’s why I picked Cirrus.  But it’s not all sunshine and roses.  Stay tuned!

Yep, That’s my SR22!

I recently became a private pilot and bought a brand new Cirrus SR22.  I did a lot of research on private planes.  Looked into Diamond, Columbia and Cirrus.  Looked at Insurance costs.  Read a lot of forum posts.  A LOT of forum posts.  I researched and debated on all the options and I picked up my SR22 a couple of weeks ago.

My decision to go with the SR22 was not easy and there’s a lot that I still didn’t know when I chose the Cirrus.  I’m surprised at the various service issues on a new plane (known as “squawks”) and my experiences with Cirrus have been very interesting.  It would have been great if I could have read another SR22 owner’s experiences as they decided on the SR22 and what it was like to pick up their aircraft.  Knowing what to expect could be extremely useful.  I hope by sharing my experience, it will help others with their research.